WIRELESS FIRE ALARM Systems
The CWSI wireless fire alarm product line offers system versatility like none other. Frequency Hopping Spread Spectrum Technology (FHSS), coupled with Bi-directional RF Communication, Repeater Network Architecture and 200 Second Supervisory Polling, provides for the industry’s most secure and reliable wireless fire alarm network.
The CWSI System
The CP3600 will support up to 1024/2048 addressable devices and repeaters while providing true network operation and communication. Network operation includes wireless command signals to repeaters and wireless relays for activation of control functions such as appliance circuits, elevator recall, HVAC control and more. The CP3600 allows for the reporting of up to four separate alarm types and provides for event memory recall of alarm, supervisory and all control functions. Alarm and trouble signals are also wirelessly transmitted to remote annunciators.
WRA-3 Wireless Remote Annunciator
The Model AR-5 Repeater, UL Listed 864 Accessory Device, is an addressable bi-directional repeater which is used to form a wireless network which receives, screens, verifies, and retransmits low power radio signals from other CWSI wireless initiating devices, repeaters and control panels. In addition to providing RF signaling within the installation, the AR-5 provides two supervised addressable Notification Appliance Circuits (NACs). An optional RM-5 Plug-in Relay Module adds 5 Form C Relays to the AR-5.
RB Relay Box
SR-5 Wireless Relay
Model 310 Manual Fire Alarm Pull Station
Model 301/302 Smoke Detectors
Model 320 Wireless Heat Detector
The Model 345/345TS Fire Transmitters are addressable transmitters (monitoring modules) designed specifically for connection to initiating devices, sprinkler flow and supervisory switches, and other UL miscellaneous accessories with normally open contacts. The Model 345/345TS Fire Transmitters are UL Listed 864 Accessory Devices. In addition to the supervisory features such as low battery, tamper, and end of line violation, the Models 345/345TS offer the option of either Style 1 or Style 2 wiring configuration. Jumper selection enables it to either transmit a Trouble or Alarm signal on Contact Closure. When monitoring a trouble on a third party panel it will now be displayed as a Trouble instead of Supervisory.
Model 350 Wireless CO Detector
The industry’s first Wireless Low Frequency Solution, the Model 520 Low Frequency Sounder is completely battery operated and fully supervised. Temporal 3 notifications for smoke detector applications. The 520 provides extensive battery life and is the economical solution for applications requiring Low Frequency compliance. A built in sounder test allows for accurate decibel level verification prior to installation. Synchronization can be achieved through interconnecting multiple units.
To learn more about CWSI Wireless Fire Alarm Systems, applications and supported technologies call
CALL WITH QUESTIONS.
RELY ON OUR KNOWLEDGE.
DEPEND ON OUR EXPERIENCE.